Utensili multiuso, pinze e coltelli multiuso

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

ZUBEHÖR, DAS INNERHALB IHRER SCHLÜSSELANHÄNGER ZU VERWENDEN IST

* Es hat Cutter und Cutter Funktionen
* Ausgestattet mit einem Schnellsplint
* Ausgestattet mit 10 Ersatzklingen, leicht austauschbar
* Aus Titan, mit Teilen aus rostfreiem Stahl
* Original Key-Bar-Zubehör
* Hergestellt in den USA


DIE MARKENPHILOSOPHIE

Die Philosophie hinter der Key-Bar ist einfach und das Ergebnis einer Notwendigkeit: Tragen Sie Ihre Schlüssel täglich in der Tasche, ohne dass sie Lärm machen und sich überall bewegen, was unangenehm ist.

Es tritt dann in die Szene Kreativität und Michael Taylor inventica, dass nach vielen Stunden der Forschung und Prototypen Leistungen in ihrer eigenen kleinen Werkstatt in Savannah, USA, erfand Key Bar. Ein kleine Scheibe Schlüsselbund, konfigurierbar nach Belieben, der die Tasten ermöglicht, um immer zu sein, nicht Lärm während des Transports zu emittieren und bequem in seiner eigenen Tasche oder an den Band verankert passen.

Die Entwicklung von Key-Bar hat gerade erst begonnen, aber ihr Potenzial ist enorm. In der Tat ist es möglich, zusätzliches Zubehör separat zu kaufen, zusammen mit den Schlüsseln, mit denen Sie ein kleines Mehrzweckwerkzeug erstellen können, das für jeden Fall jeden Tag bereit ist!


Zum Zusammenbauen und Konfigurieren Ihrer Key-Bar sind keine speziellen Werkzeuge erforderlich. Alle Griffe sind aus Vollmaterial und CNC-Werkbänken gefertigt und dann von Hand bearbeitet.

Jeder Key-Bar ist aus nicht eisenhaltigen Materialien hergestellt, während die Schrauben aus rostfreiem Stahl sind, um maximale Hygiene und extrem einfache Reinigung und Wartung zu garantieren.

Patentiert und komplett in Savannah, USA hergestellt

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Accessory original Key-Bar made entirely of titanium; It has functions of small flat screwdriver and bottle opener. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Die Philosophie hinter Key-Bar ist einfach und das Ergebnis einer Notwendigkeit: täglich Ihre Schlüssel in der Tasche, ohne dass diese machen Lärm tragen und bewegen, wo immer Ärger zu schaffen.

Dann betritt die Szene Kreativität und Michael Taylor inventica, dass nach vielen Stunden der Forschung und Prototypen Erfolge in ihrer eigenen kleinen Werkstatt in Savannah, USA, erfand Key-Bar. Ein kleiner Keychain-Laufwerk, konfigurierbar nach Belieben, die Schlüssel zu sein, immer in Ordnung, nicht zu emittieren Lärm während des Transports und passen bequem verankert in der Tasche oder an Ihrem Gürtel ermöglicht.

Die Entwicklung von Key-Bar ist erst am Anfang, aber das Potenzial ist riesig. Und: "Sie können separat zusätzliches Zubehör kaufen, um mit den Schlüsseln zusammen zu sein, die es Ihnen ermöglichen, täglich ein kleines Multi-Tool zu bauen bereit für alle Eventualitäten!

Griffmaterial: G10 und Aluminium
Grifflänge: 89mm.
Keyless-Gewicht: 34g.

Das Verkaufspaket enthält:
2x Schrauben 1/2 ": 1 bis 4 Tasten zum Einfügen
2x 3/4 "Schrauben: 1 bis 8 Tasten zum Einfügen
2x Schrauben 1/12 ": 1 bis 12 Tasten zum Einfügen
15x Abstandshalter
2x O-Ring
Correggiolo 1x
1x Titanclips

Keine speziellen Werkzeuge zu montieren und konfigurieren Sie Ihre Key-Bar; Alle Griffe sind aus massivem Knüppel aus einem Material hergestellt und CNC-bearbeitet und dann von Hand beendet.

Jeder Key-Bar ist mit NE-Materialien, während die Schrauben aus rostfreiem Stahl sind, um die maximale dell'igene und extrem einfache Reinigung und Wartung zu gewährleisten.

Patentierte und ganz in Savannah, USA hergestellt

Die Philosophie hinter Key-Bar ist einfach und das Ergebnis einer Notwendigkeit: täglich Ihre Schlüssel in der Tasche, ohne dass diese machen Lärm tragen und bewegen, wo immer Ärger zu schaffen.

Dann betritt die Szene Kreativität und Michael Taylor inventica, dass nach vielen Stunden der Forschung und Prototypen Erfolge in ihrer eigenen kleinen Werkstatt in Savannah, USA, erfand Key-Bar. Ein kleiner Keychain-Laufwerk, konfigurierbar nach Belieben, die Schlüssel zu sein, immer in Ordnung, nicht zu emittieren Lärm während des Transports und passen bequem verankert in der Tasche oder an Ihrem Gürtel ermöglicht.

Die Entwicklung von Key-Bar ist erst am Anfang, aber das Potenzial ist riesig. Und: "Sie können separat zusätzliches Zubehör kaufen, um mit den Schlüsseln zusammen zu sein, die es Ihnen ermöglichen, täglich ein kleines Multi-Tool zu bauen bereit für alle Eventualitäten!

Griffmaterial: G10 und Aluminium
Grifflänge: 89mm.
Keyless-Gewicht: 34g.

Das Verkaufspaket enthält:
2x Schrauben 1/2 ": 1 bis 4 Tasten zum Einfügen
2x 3/4 "Schrauben: 1 bis 8 Tasten zum Einfügen
2x Schrauben 1/12 ": 1 bis 12 Tasten zum Einfügen
15x Abstandshalter
2x O-Ring
Correggiolo 1x
1x Titanclips

Keine speziellen Werkzeuge zu montieren und konfigurieren Sie Ihre Key-Bar; Alle Griffe sind aus massivem Knüppel aus einem Material hergestellt und CNC-bearbeitet und dann von Hand beendet.

Jeder Key-Bar ist mit NE-Materialien, während die Schrauben aus rostfreiem Stahl sind, um die maximale dell'igene und extrem einfache Reinigung und Wartung zu gewährleisten.

Patentierte und ganz in Savannah, USA hergestellt

Die Philosophie hinter Key-Bar ist einfach und das Ergebnis einer Notwendigkeit: täglich Ihre Schlüssel in der Tasche, ohne dass diese machen Lärm tragen und bewegen, wo immer Ärger zu schaffen.

Dann betritt die Szene Kreativität und Michael Taylor inventica, dass nach vielen Stunden der Forschung und Prototypen Erfolge in ihrer eigenen kleinen Werkstatt in Savannah, USA, erfand Key-Bar. Ein kleiner Keychain-Laufwerk, konfigurierbar nach Belieben, die Schlüssel zu sein, immer in Ordnung, nicht zu emittieren Lärm während des Transports und passen bequem verankert in der Tasche oder an Ihrem Gürtel ermöglicht.

Die Entwicklung von Key-Bar ist erst am Anfang, aber das Potenzial ist riesig. Und: "Sie können separat zusätzliches Zubehör kaufen, um mit den Schlüsseln zusammen zu sein, die es Ihnen ermöglichen, täglich ein kleines Multi-Tool zu bauen bereit für alle Eventualitäten!

Griffmaterial: Aluminium eloxiert
Grifflänge: 89mm.
Keyless-Gewicht: 40g.

Das Verkaufspaket enthält:
2x Schrauben 1/2 ": 1 bis 4 Tasten zum Einfügen
2x 3/4 "Schrauben: 1 bis 8 Tasten zum Einfügen
2x Schrauben 1/12 ": 1 bis 12 Tasten zum Einfügen
15x Abstandshalter
2x O-Ring
Correggiolo 1x
1x Titanclips

Keine speziellen Werkzeuge zu montieren und konfigurieren Sie Ihre Key-Bar; Alle Griffe sind aus massivem Knüppel aus einem Material hergestellt und CNC-bearbeitet und dann von Hand beendet.

Jeder Key-Bar ist mit NE-Materialien, während die Schrauben aus rostfreiem Stahl sind, um die maximale dell'igene und extrem einfache Reinigung und Wartung zu gewährleisten.

Patentierte und ganz in Savannah, USA hergestellt

Besteck Collini von Busto Arsizio ist der offizielle Händler für Italien der Key-Bar Marke

Die Philosophie hinter Key-Bar ist einfach und das Ergebnis einer Notwendigkeit: täglich Ihre Schlüssel in der Tasche, ohne dass diese machen Lärm tragen und bewegen, wo immer Ärger zu schaffen.

Dann betritt die Szene Kreativität und Michael Taylor inventica, dass nach vielen Stunden der Forschung und Prototypen Erfolge in ihrer eigenen kleinen Werkstatt in Savannah, USA, erfand Key-Bar. Ein kleiner Keychain-Laufwerk, konfigurierbar nach Belieben, die Schlüssel zu sein, immer in Ordnung, nicht zu emittieren Lärm während des Transports und passen bequem verankert in der Tasche oder an Ihrem Gürtel ermöglicht.

Die Entwicklung von Key-Bar ist erst am Anfang, aber das Potenzial ist riesig. Und: "Sie können separat zusätzliches Zubehör kaufen, um mit den Schlüsseln zusammen zu sein, die es Ihnen ermöglichen, täglich ein kleines Multi-Tool zu bauen bereit für alle Eventualitäten!

Griffmaterial: Aluminium eloxiert
Grifflänge: 89mm.
Keyless-Gewicht: 40g.

Das Verkaufspaket enthält:
2x Schrauben 1/2 ": 1 bis 4 Tasten zum Einfügen
2x 3/4 "Schrauben: 1 bis 8 Tasten zum Einfügen
2x Schrauben 1/12 ": 1 bis 12 Tasten zum Einfügen
15x Abstandshalter
2x O-Ring
Correggiolo 1x
1x Titanclips

Keine speziellen Werkzeuge zu montieren und konfigurieren Sie Ihre Key-Bar; Alle Griffe sind aus massivem Knüppel aus einem Material hergestellt und CNC-bearbeitet und dann von Hand beendet.

Jeder Key-Bar ist mit NE-Materialien, während die Schrauben aus rostfreiem Stahl sind, um die maximale dell'igene und extrem einfache Reinigung und Wartung zu gewährleisten.

Patentierte und ganz in Savannah, USA hergestellt

Besteck Collini von Busto Arsizio ist der offizielle Händler für Italien der Key-Bar Marke

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Accessory original Key-Bar made entirely of titanium. Length of 83mm. For use within their own Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The inspiration behind the KEY-BAR was the annoyance of the noise and disorganization of the many keys that creator Michael Taylor carries daily. In his workshop one weekend he decided to do something about his problem. After many hours of research, trial and error and several prototypes later, he arrived at the current version of the KEY-BAR.

Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-BAR with removable Titanium pocket clip in your choice of color
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (allows you to adjust the tension to your liking)
(1) Key fob link

Dimensions

Length: 3.5 in

Weight: 1.6 oz

Screw post dimension: .164 in

# of keys the KEY-BAR can hold

Up to 12 with the provided screws

Up to 28 with longer screws, available here

Fits 90% of keys

No special tools are necessary for assembly.

All KEY-BARs are CNC milled from solid billet then hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

Key-Bar - Portachiavi in Carbonio clip in titanium and titanium - CFTKB

PRODUCT DESCRIPTION
Your KEY-BAR arrives in a hinged tin and includes:

(1) KEY-bar with removable Titanium pocket clip in your choice of color,
(2) 1/2 in. screws (1-4 keys)
(2) 3/4 in. screws (1-8 keys)
(2) 7/8 in. screws (1-12 keys)
(15) Washers
(2) O rings (Allows you to adjust the voltage to your liking)
(1) Key fob link
 
Dimensions

Length: 3.5 in

Weight: 1.4 oz

Screw post dimension: .164 in

# Of keys the KEY-BAR can hold

Up to 12 With the provided screws

With up to 28 longer screws, available here

Fits 90% of keys

No special tools are Necessary for assembly.

All KEY-bars are CNC milled from solid billet then a hand finished to order.

Every KEY-BAR is 100% non-ferrous and all hardware is stainless steel so your KEY-BAR will not rust.

MADE IN THE USA

SAVANNAH, GA

PATENTED

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Carbon fiber and aluminum anodized
Handle length: 89mm.
Weight without keys: 33g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA


Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

The philosophy behind Key-Bar is simple and the result of a need: daily carry your keys in your pocket without the latter make noise and move anywhere creating hassles.

Then enters the scene creativity and inventica Michael Taylor who, after many hours of research and creation of prototypes in his small workshop in Savannah, USA, invented Key-Bar. A small keychain drive, configurable at will, that allows keys to be always in order, not to emit noise during transport and anchored fit comfortably within your pocket or attached to your belt.

The development of Key-Bar is just beginning, but its potential is enormous. And 'you can separately purchase additional accessories to be included along with keys that allow the creation of a small multi-tool ready for any eventuality daily!

Handle Material: Anodized aluminum
Handle length: 89mm.
Weight without keys: 40g.

The sales package includes:
2x Screws 1/2 ": to insert 1 to 4 keys
2x 3/4 "Screws: to insert 1 to 8 keys
2x Screws 1/12 ": to insert keys from 1 to 12
15x spacers
2x O-ring
1x correggiolo
1x titanium clip

No special tools are required to assemble and configure your Key-Bar; all handles are made from solid billets of material and CNC machined and then finished by hand.

Each Key-Bar is made with non-ferrous materials, while the screws are stainless steel, so as to ensure the maximum dell'igene and extreme ease of cleaning and maintenance.

Patented and manufactured entirely in Savannah, USA

Cutlery Collini Busto Arsizio is official dealer for Italy brand Key-Bar

Maserin - Multipurpose Hunting - Cocobolo - 131 / 3NT - knife Intended Use : Hunting Type of production : industrial Blade: 440 stainless steel Treatment Lama : - Production Lama : Italy Handle: Stag Blade length : 80mm . Blade Thickness : 3mm. Closed Length : 120mm . Overall length : 205mm . Balancing : - Weight: 230g . Lock: Back Lock Clip: - Sheath: - Note : for skinned and saw blade for wood