Jagdmesser: Zuverlässigkeit und Langlebigkeit in der Natur

Herkunft: Von einem privaten Eigentümer übernommen, zuvor gekauft
Zustand: Insgesamt in ausgezeichnetem Zustand
Verfügbarkeit: SEIT 2009 NICHT MEHR PRODUZIERT
Schärfung: Original
Spuren auf der Klinge: Keine
Spuren auf dem Griff: Keine
Verpackung: NICHT ENTHALTEN
Scheide: Schwarzes Leder
Handbücher, Zertifikate und Garantien: Echtheitszertifikat
Inspektion: Geprüft und zertifiziert von unserem internen Labor

Das Chris Reeve Ubejane Skinner ist ein hochwertiges Jagdmesser, hergestellt in den USA vom renommierten Handwerker Chris Reeve. Der Begriff "Ubejane" bedeutet "Nashorn" in der Zulu-Sprache und spiegelt die Robustheit und Zuverlässigkeit dieses Werkzeugs wider. Hergestellt zwischen 1990 und 2009, ist das Ubejane Skinner heute ein begehrtes Sammlerstück.

Produktdetails:

• Einsatzzweck: Sammlung/Jagd/Sport
• Produktionsart: Halbhandgefertigt
• Herstellungsland: USA
• Klinge: A2-Stahl mit einer Härte von 55/57 HRC
• Klingenfinish: Schwarze, blendfreie Kalgard-Beschichtung
• Griff: Hohlgriff aus Stahl mit Rändelung für sicheren Halt
• Klingenlänge: 114 mm
• Klingenstärke: 4,5 mm
• Geschlossene Länge: Nicht anwendbar (Feststehendes Messer)
• Gesamtlänge: 241 mm
• Geschlossene Dicke: Nicht anwendbar
• Gewicht: 326 g
• Verschluss: Nicht anwendbar (Feststehendes Messer)
• Clip: Nicht vorhanden
• Verpackung: Schwarze Lederscheide; Kartonbox nicht enthalten
• Hinweise: Seit 2009 nicht mehr produziert; seltenes Sammlerstück mit Originalzertifikat

In der Tradition von Chris Reeve Knives hat das Inyoni Vogel- und Fischjagdmesser seinen Namen vom Zulu-Wort für "Vogel".  Mit einem Gewicht von 68 Gramm ist die neueste Version des Inyoni federleicht und bietet alle Funktionen seines Vorgängers, ohne dabei zu schwer zu sein.  

Seine Drop-Point-Klinge mit durchgehendem Erl macht es zum idealen Messer für die Bearbeitung von Vögeln und Fischen, während es gleichzeitig eine ausreichende Schärfe für viele größere Wildarten sowie eine lange Liste anderer Schneidaufgaben außerhalb des Jagdgebiets bietet. Die schlanke Kydexscheide passt perfekt über die Griffe des Inyoni.

Bestimmungsgemäßer Gebrauch: Sport/Jagd

Herstellungsart: MidTech
Herstellungsland: USA
Klinge: Voller Erl aus CPM MagnaCut 63/64HRC Stahl
Klingenfinish: Stonewashed
Griff: Micarta
Klingenlänge: 96mm.
Dicke der Klinge: 3,2 mm.
Gesamtlänge: 202 mm.
Gewicht: 68g.
Scheide: Slim Fit aus thermogeformtem Kydex
Verpackung: Pappschachtel mit Chris Reeve-Logos, Paracord-Lanyard, Wartungsschlüssel, Zertifikate und Garantien

MESSER AUS EINER PRIVATSAMMLUNG
* Typ: Zuvor gekauft
* Zustand: Wie neu, nie benutzt
* Kommerziell verfügbar, aus der Produktion genommen
* Schärfen: Werk
* Markierungen auf der Klinge: Nein
* Markierungen auf dem Griff: Nein
* Box: Abwesend
* Scheide: Vorhanden, original, wie neu
* Handbücher, Bescheinigungen und Garantien: Nein
* Geprüft und zertifiziert durch unser hauseigenes Labor

Verwendungszweck: Sammeln/Jagen/Sport

Herstellungsart: Midtech
Land der Herstellung: USA
Klinge: A2 55/57HRC Stahl
Klingenbehandlung: Schwarz
Griff: Braunes Canvas Micarta
Länge der Klinge: 108mm.
Dicke der Klinge: 4mm.
Gesamtlänge: 205mm.
Gewicht: 203g.
Scheide: Schwarzes Leder
Verpackung: -
Bemerkungen: Messer aus einer privaten Sammlung wie neu, ohne Box und Zertifikate

Seltenes Messer, das 2007 von Chris Reeve hergestellt wurde und seit 2013 nicht mehr hergestellt wird. Messer aus einer Privatsammlung in neuwertigem Zustand, mit Originalscheide, ohne Originalschatulle und Zertifikat. Geprüft und zertifiziert durch unser internes Labor.

Verwendungszweck: Sport / Jagd

Klinge: CPM-S30V 58/59HRC rostfreier Stahl
Klingenbehandlung: Stonewash-Finish
Griff: Cocobolo-Holz
Klingenlänge: 88 mm.
Klingenstärke: 3,5 mm.
Geschlossene Länge: -
Gesamtlänge: 201 mm.
Ausgleich: Zurücksetzen
Gewicht: 76 g.
Schließung: -
Klipp: -
Scheide: aus Leder
Anmerkungen: inyoni bedeutet auf Zulu Vogel

Verwendungszweck: Jagd / Sport

Art der Produktion: Semi-Industrie
Lama-Produktion: Finnland
Klinge: in Stahl D2
Klingenbehandlung: -
Griff: Birkenwurzel
Klingenlänge: 75mm.
Klingenstärke: 3mm.
Länge geschlossen: 103mm.
Gesamtlänge: 178mm.
Dick wenn geschlossen: 7mm.
Ausgleich: -
Gewicht: 100g.
Verschluss: Liner Lock
Clip: Edelstahl
Scheide: -
Verpackung: Karton mit EnZo-Logos
Hinweise: Scandi-Schärfung

For 28 years, (the A2 round handled) One Piece Range of knives has been an essential part of Chris Reeve Knives. From Chris first designing the concept while serving in the South African Army in Namibia to today, these knives have been used, carried, admired and collected in all corners of the world.

An integral part of the success of this range has been Eddie Myers. Eddie was Chris's foreman when Chris was an apprentice tool and die maker. They have known each other more years than they care to count and Chris has always regarded Eddie as mentor, teacher, friend and consultant! For 25 years, Eddie has machined the blanks for our One Piece Knives. Still living in South Africa, Eddie and his wife Caroline, have provided fine service to deliver the best blanks at the best price. (There is no question that the volatility of the South African currency has helped over the years!)

Eddie and Caroline want to retire. Ed wants to buy a boat again and go fishing whenever he feels like it! This brought us to a cross-roads--do we try to source a vendor in the USA or should we simply retire a - Classic. We have decided to take the second choice--to discontinue the One Piece Range.

To celebrate the end of this era, Chris Reeve Knives offered a limited edition of 250 Commemorative Mk IVs. The Mk IV was the first iteration of the one piece concept to become known there is still call for this model which we initially discontinued in 1995. It has a 7 inch blade with a clip point and sawback. For this commemorative edition, the butt cap is engraved and polished and the sheath has a commemorative logo embossed.

Specifications

Blade Material: A2 tool steel
Blade Hardness: 55-57 RC
Blade Coating: KG Gun-Kote
Blade Length: 7" sawback blade
Blade Thickness: 0.187"
Overall Length: 12"
Handle Material: A2 Tool Steel
But Cap Material: D65S aluminum
Sheath: Leather with horizontal carry belt loop, Snap
Weight: 12.90 oz. (365 grams)
Limited Edition, only 250 pieces produced!
Handmade in the USA
One Piece Knife Concept

The idea of the one piece knife was born while Chris was serving time in the South African Army on the Namibia/Angola border in 1979. The experiences of military service have contributed substantially to the features in these knives.

Chris realized that the ideal working knife was a tool which was strong, reliable and impervious to temperature and humidity. Extensive time has been devoted to design, and research and development to improve both the blade designs and the methods used in making the knives.

Each knife is made from a solid billet of A2 tool steel. The stock removal method results in two distinct advantages--the strength/weight ratio is exceptional and there is no handle/blade join. This means that there is no area where the blade and handle could come apart--a weakness in the design of other hollow handle knives. The handle cavity is larger than that of any similar knife. The hollow handle is closed with a butt cap made of 6061 aluminum which screws into the handle against a Neoprene "O" ring, ensuring the cavity is sealed from dust and moisture. All the one piece knives are hardened to 55-57 RC and random checks are made to ensure accuracy. This hardness gives superb toughness, good edge retention and allows for efficient sharpening in the field. Each knife is coated with super hi-tech KG Gun-Koteä originally developed for use in the aerospace industry. This coating offers a durable, long-lasting, non-reflective covering. Included in the price of each knife is a hand-made leather sheath. A lifelong guarantee, signed by Chris accompanies each knife.
The one piece design offers the highest possible weight/strength ratio
A2 Tool Steel offers excellent edge retention and good shock resistance
Hardness at between 55 and 57 Rockwell C is not brittle but gives good edge retention along with ease of sharpening
An 8" hollow grind is used with a full thickness back edge. All designs are ground to allow the full thickness of the back edge to come as close to the point as possible, affording a very strong front tip but not restricting the knife's ability to pierce
The hollow handle, which is created to reduce weight, is larger than any similar sized knife because there is no join between handle and blade
The aluminum butt cap provides an airtight closure for the hollow handle and is designed so that it can be used for hammering. Because using the knife as a hammer can be dangerous to one's knuckles and fingers, we do not recommend that this be done unless in an emergency situation. It is preferable to use a hammer
Full depth precision machined knurling affords maximum non-slip grip
Non-reflective KG Gun-Koteä coating gives lasting protection
All knives carry a lifetime guarantee and a damaged knife will be replaced or repaired at Chris' discretion. This guarantee does not cover damage to a knife that has been thrown or used for heavy levering
These knives are used by hunters, backpackers, SWAT teams, military personnel, firefighters and police all over the world. They are also to be found in many knife collections and most of our customers own more than one of our knives
Each hand made leather sheath is designed to fit the knife well, to give maximum protection to the carrier and the knife when being carried. Because we continue to improve our design, sheaths supplied might not be exactly as shown in the brochure
Replacement butt caps and sheaths are available at reasonable prices
Many customers feel that once their knives have been used, they lose collector's value. This is not so as the knife can be returned to Chris Reeve Knives, where it will be sandblasted, re-coated with KG Gun-Kotea, sharpened and returned to it's original condition. Contact Chris Reeve Knives for cost. Please return knife in sheath

Destinazione d'uso: Caccia/Sportivo

Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S35VN 58/59HRC
Trattamento Lama: Stone Washed
Manicatura: Brown canvas Micarta
Lunghezza lama: 95mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 216mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 175g.
Chiusura: -
Clip: -
Fodero: Cuoio marrone by Gfeller Casemakers
Confezione: Scatola di cartone bianca con loghi Chris Reeve; certificati di garanzia
Note: -

EnZo - PK 70 Flat - CPM-S30V - G10 Black - 2911 - knife

Intended Use: Hunting / Sports

Production Type: Semi-Industrial
Production Lama: Finland
Blade: stainless steel CPM-S30V
Treatment Lama: -
Handle: G10 Black
Blade length: 70mm.
Blade thickness: 2mm.
Closed Length: 93mm.
Overall length: 170mm.
Thick when closed: 9mm.
Balancing: -
Weight: 78g.
Closure: Without lock blade - retention spring back
Clip: -
Sheath: -
Packaging: -
Notes: Sharpening type Scandi Zero
Notes: Cutlery Collini is distributor for Italy knives Enzo

EnZo - Trapper 95 - D2 - Green Canvas Micarta - 2016 knife

Intended Use: Hunting / Sports

Production Type: Semi-Industrial
Production Lama: Finland
Blade: stainless steel D2
Treatment Lama: -
Handle: Micarta Green
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: -
Overall length: 207mm.
Thick when closed: -
Balancing: -
Weight: 146g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Scandi
Notes: Cutlery Collini is distributor for Italy knives Enzo

EnZo - Elver 85 - D2 - Green Canvas Micarta - 2205 knife

Intended Use: Hunting / Sports

Production Type: Semi-Industrial
Production Lama: Finland
Blade: Steel D2
Treatment Lama: -
Handle: Micarta Black Green
Blade length: 80mm.
Blade thickness: 3.5mm.
Length closed: -
Overall length: 187mm.
Thick when closed: -
Balancing: -
Weight: 120g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Flat

Destinazione d'uso: Survival/Sportivo

Lama: in acciaio inox AN-58
Manicatura: plastica e metallo
Lunghezza lama: 105mm.
Spessore della lama: 3mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 210mm.
Bilanciatura: arretrata, a 1.5cm dal ramo di guardia inferiore
Peso: 78g.
Chiusura: -
Clip: -
Fodero: in pelle
Note: -

EnZo - PK 70 - CPM-S30V - Birch - 2902 - knife

Intended use: Hunting / Sporting

Production Type: Semi-Industrial
Production Blade: Finland
Blade: Stainless steel CPM-S30V
Treatment Blade: -
Handle: Birch Wood
Blade length: 70mm.
Blade thickness: 2mm.
Closed Length: 93mm.
Overall length: 170mm.
Thickness when folded: 9mm.
Balancing: -
Weight: 82g.
Closure: Without Lock Blade - retention spring back
Clip: -
Sheath: -
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Scandi Zero
Notes: Collini Cutlery is the distributor for Italy Enzo knives

Verwendungszweck: Jagd / Sport

Art der Produktion: Semi-Industrie
Lama-Produktion: Finnland
Klinge: CPM-S30V Edelstahl
Klingenbehandlung: -
Griff: Kohlefaser
Klingenlänge: 70mm.
Klingenstärke: 2mm.
Länge geschlossen: 93mm.
Gesamtlänge: 170mm.
Dick wenn geschlossen: 9mm.
Ausgleich: -
Gewicht: 82g.
Schließen: Keine Klingenarretierung - Rückhaltefeder
Clip: -
Scheide: -
Verpackung: Karton mit EnZo-Logos
Hinweise: Schärfen des gesamten flachen Typs

EnZo - Birk 75 - CPMS30W - Carbon Fiber - 2701 - knife

Intended use: Hunting / Sporting

Production Type: Semi-Industrial
Production Blade: Finland
Blade: Stainless CPMS30W
Treatment Blade: -
Handle material: carbon fiber
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed Length: 103mm.
Overall length: 178mm.
Thickness when folded: 7mm.
Balancing: -
Weight: 102g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Scandi
Notes: Collini Cutlery is the distributor for Italy Enzo knives

EnZo - PK 70 - CPM-S30V - Carbon fiber - 2901 - knife

Intended use: Hunting / Sporting

Production Type: Semi-Industrial
Production Blade: Finland
Blade: Stainless steel CPM-S30V
Treatment Blade: -
Handle material: carbon fiber
Blade length: 70mm.
Blade thickness: 2mm.
Closed Length: 93mm.
Overall length: 170mm.
Thickness when folded: 9mm.
Balancing: -
Weight: 86g.
Closure: Without Lock Blade - retention spring back
Clip: -
Sheath: -
Packaging: Cardboard box with logos EnZo
Notes: Sharpening Flat type
Notes: Collini Cutlery is the distributor for Italy Enzo knives

EnZo - Trapper 95 - O1 - Black Canvas Micarta - 2018 knife

Intended use: Hunting / Sporting

Production Type: Semi-Industrial
Production Blade: Finland
Blade: Stainless O1
Treatment Blade: -
Handle: Black Micarta
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: -
Overall length: 207mm.
Thick when closed: -
Balancing: -
Weight: 146g.
Closure: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Scandi

EnZo - Camper 125 - D2 - Black Canvas Micarta - 2083 - knife

Intended use: Hunting / Sporting

Production Type: Semi-Industrial
Production Blade: Finland
Blade: Stainless D2
Treatment Blade: -
Handle: Black Micarta
Blade length: 125mm.
Blade thickness: 3.5mm.
Length closed: -
Overall length: 245mm.
Thick when closed: -
Balancing: -
Weight: 160g.
Closure: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Scandi Micro Bevel
Notes: Collini Cutlery is the distributor for Italy Enzo knives

EnZo - Camper 125 - D2 - Curly Birch - 2081 - knife

Intended use: Hunting / Sports

Type of production: Semi-Industrial
Production Blade: Finland
Blade: Stainless D2
Treatment Lama: -
Handle: Birch Burl
Blade length: 125mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 245mm.
Thick when closed: -
Balance: -
Weight: 160g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Scandi Micro Bevel
Notes: Collini Cutlery is the distributor for Italy of the knives Enzo

Verwendungszweck: Jagd/Sport

Produktionsart: Industriell
Land der Produktion: Finnland
Klinge: D2 Stahl
Klingenfinish: Satinierte Oberfläche
Griff: Birke, Bruyère
Länge der Klinge: 75 mm.
Dicke der Klinge: 2,5 mm.
Länge geschlossen: 103 mm.
Gesamtlänge: 178 mm.
Dicke im geschlossenen Zustand: 7 mm.
Gewicht: 102g.
Verschluss: Liner Lock
Clip: Rostfreier Stahl
Verpackung: Pappschachtel mit EnZo-Logos
Anmerkungen: Scandi-Typ Schärfung